• Professional-grade islotated studio moitor stands
• Telescoping column for height adjustment
• Solid metal speaker platform
• Heavy base with carpet spikes
• 40 lbs maximum speaker load

The Akai RPM8 Studio Monitor, PAIR Main Features Include:

• Specifically intended for use with AKAI MPC music production workstations and production controllers.
• Two-way, Nearfield
• Active, Bi-amplified
• 8" woven-kevlar low-frequency drivers with 80W RMS Output
• 1" silk-dome tweeter with 40W RMS Output
• constructed of industry-standard MDF for low resonance
• dually ported on the front baffle for bass extension
• monitors contain active, fourth-order crossovers for outstanding separation and optimal power management
• Delivers up to 113 dB SPL
• Accurate frequency response from 39 Hz to 20 kHz
• Bi-colour LED clip indicator
• XLR-balanced 1/4" TRS inputs

With a complete redesign of our Resolv reference monitors, Samson has combined precise engineering and the highest-quality components with an elegant new cabinet design, providing extremely accurate monitoring for recording studio, post-production and other multimedia applications

• Two-way, active studio reference monitor with ported tuned enclosure
• 8-inch woven carbon fiber woofer for tight and controlled low frequency response
• 1.25-inch silk dome tweeter with neodymium magnets, heat-sink and ferro-fluid cooling for smooth and sweet high frequency response
• Low diffraction waveguide
• Bi-amp power with 75 watts on the LF driver and 25 watts on the HF driver
• Frequency response: 30Hz-30kHz
• Active crossover utilizing a multi-pole design for linear response from bottom to top
• Four-position high frequency lift control
• XLR and 1/4-inch balanced inputs as well as unbalanced RCA inputs
• AV shielded for multimedia applications
• Solid MDF (Medium Density Fiberboard) construction for maximum SPL

With a complete redesign of our Resolv reference monitors, Samson has combined precise engineering and the highest quality components with an elegant new cabinet design, providing extremely accurate monitoring for recording studio, post-production and other multimedia applications

• Two-way, active studio reference monitor with ported tuned enclosure
• 6.5-inch woven carbon fiber woofer for tight and controlled low frequency response
• 1.25-inch silk dome tweeter with neodymium magnets, heat-sink and ferro-fluid cooling for smooth and sweet high frequency response
• Low diffraction waveguide
• Bi-amp power with 75 watts on the LF driver and 25 watts on the HF driver
• Frequency response: 40Hz-30kHz
• Active crossover utilizing a multi-pole design for linear response from bottom to top
• Four-position high frequency lift control
• XLR and 1/4-inch balanced inputs, as well as unbalanced RCA inputs
• AV shielded for multimedia applications
• Solid MDF (Medium Density Fiberboard) construction for maximum SPL

With a complete redesign of our Resolv reference monitors, Samson has combined precise engineering and the highest-quality components with an elegant new cabinet design, providing extremely accurate monitoring for recording studio, post-production and other multimedia applications

• Two-way, active studio reference monitor with ported tuned enclosure
• 5-inch woven carbon fiber woofer for tight and controlled low frequency response
• 1.25-inch silk dome tweeter with neodymium magnets, heat-sink and ferro-fluid cooling for smooth and sweet high frequency response
• Low diffraction waveguide
• Bi-amp power with 50 watts on the LF driver and 20 watts on the HF driver
• Frequency response: 50Hz-30kHz
• Active crossover utilizing a multi-pole design for linear response from bottom to top
• Four-position high frequency lift control
• 1/4-inch balanced inputs as well as unbalanced RCA inputs
• AV shielded for multimedia applications
• Solid MDF (Medium Density Fiberboard) construction for maximum SPL

Taking care of the low end is the Resolv120a powered subwoofer. A powerful 120 watt low frequency amplifier drives a heavy-duty 10" transducer, reproducing tones between 40–180 Hz. The unit has a built-in active crossover, a phase switch, an auto sleep mode and a convenient mute switch jack allowing the user to easily switch on and off the subwoofer on the fly.

• 120 watt low frequency amplifier
• heavy-duty 10" transducer
• 40–180 Hz.
• active crossover
• a phase switch
• an auto sleep mode
• mute switch jack

The MediaOne 3a Active Monitors are an ideal near-field monitor system for studios, video post-production suites, fixed installations or anywhere else great sound is desired. Thanks to top-notch components and innovative design, the versatility of these monitors guarantees professional audio and reliable performance in any application.

• Precision-tuned, rear-vented enclosure
• 3-inch copolymer woofer
• 25mm silk dome high frequency driver
• 2 x 15 watts of Class A/B internal power
• Front panel level control, headphones and stereo input jack
• Convenient RCA inputs
• Attractively finished in black satin vinyl covering
• AV shielded for multimedia applications
• Passive crossovers utilizing a multi-pole design for linear response from bottom to top
• 2 meter, 20-gauge speaker cable included

The MediaOne 4a active monitors are an ideal near-field monitor system for studios, video post-production suites, fixed installations or anywhere else great sound is desired. Thanks to top-notch components and innovative design, the versatility of these monitors guarantees professional audio and reliable performance in any application.

• Precision-tuned, rear-vented enclosure
• 4-inch copolymer woofer
• 25mm silk dome high frequency driver
• 2 x 20 watts of Class A/B internal power
• Front panel level control, headphones and stereo input jack
• Convenient RCA inputs
• Attractively finished in black satin vinyl covering
• AV shielded for multimedia applications
• Passive crossovers utilizing a multi-pole design for linear response
• 2 meter, 20-gauge speaker cable included

The MediaOne 5a active monitors are an ideal near-field monitor system for studios, video post-production suites, fixed installations or anywhere else great sound is desired. Thanks to top-notch components and innovative design, the versatility of these monitors guarantees professional audio and reliable performance in any application.

• Precision-tuned, rear-vented enclosure
• 5-inch copolymer woofer
• 25mm silk dome high frequency driver
• 2 x 20 watts of Class A/B internal power
• Front panel level control, headphones and stereo input jack
• Convenient RCA inputs
• Attractively finished in black satin vinyl covering
• AV shielded for multimedia applications
• Passive crossovers utilizing a multi-pole design for linear response from bottom to top
• 2 meter, 20-gauge speaker cable included

Professional Accuracy, Clarity and Performance in an Affordable Powered Monitor

By combining our expertise in reference monitor design with our proven track record in studio amplification, Alesis' new M1 Active™ Biamplified Reference Monitor offers the incredibly accurate response that perfectly translates to every playback system. Its internal active crossover and custom-designed dual amplifiers ensure an extremely consistent performance under a variety of different studio conditions and program material. The result is a broad, extremely flat frequency response, clear imaging with a wide sweet spot, high power handling and detailed high- and mid-frequency response that only a professional powered monitor can deliver.

Alesis delivers pro-grade USB speaker performance to the computer desktop. Active 320 USB speakers enable you to play audio from your computer and record audio coming into the speaker to your computer. Simply plug in the USB cable to your computer – No special drivers required.

Active 320USB speakers are not only substantial audio monitors, but also serve as a convenient audio interface. Keyboards, mic pre’s, guitar effects, DJ Mixers, or standard CD and tape players can all easily connect directly to the Active 320 USB. Record them directly into your computer.

Full range, superb sound quality insures that you get more accurate audio reproduction to check your mixes. A Bass Boost switch helps emphasize bass frequencies - Great for various room situations where you want to hear more bass emphasis.

Drawing upon the design characteristics of our Expose E8B, the new VXT Series of monitors consists of three models, the VXT4, VXT6, and VXT8. With a visually striking enclosure design that is equally functional, providing low resonance, improved structural integrity and extended low-end, slotted ports for reduced port turbulence, plus a sleek curvature that provides excellent imaging characteristics and a wider sweet spot the VXT monitors achieve a new level of precision.

• Drivers: Woofer:8" Woven Kevlar
• Tweeter: 1" Silk Dome Ferrite
• Input: XLR-1/4" TRS Combo
• 10k Ohm Blanced
• Pin 1 + Sleeve = Ground
• Pin 2 + Tip = (+) High
• Pin 3 + Ring = (-) Low
• Amp & Fusing: HF: 60 Watts
• LF: 120 Watts
• 4.0A 100VAC 50Hz
• 4.0A 110-120VAC 50/60Hz
• 2.0A 220-240VAC 50/60Hz
• Frequency Response: 37Hz - 22kHz +/-1.5dB

Drawing upon the design characteristics of our Expose E8B, the new VXT Series of monitors consists of three models, the VXT4, VXT6, and VXT8. With a visually striking enclosure design that is equally functional, providing low resonance, improved structural integrity and extended low-end, slotted ports for reduced port turbulence, plus a sleek curvature that provides excellent imaging characteristics and a wider sweet spot the VXT monitors achieve a new level of precision.

• Drivers: Woofer:6" Woven Kevlar
• Tweeter: 1" Silk Dome Ferrite
• Input: XLR-1/4" TRS Combo
• 10k Ohm Blanced
• Pin 1 + Sleeve = Ground
• Pin 2 + Tip = (+) High
• Pin 3 + Ring = (-) Low
• Amp & Fusing: HF: 30 Watts
• LF: 60 Watts
• 3.15A 100VAC 50Hz
• 3.15A 110-120VAC 50/60Hz
• 1.6A 220-240VAC 50/60Hz
• Frequency Response: 49Hz - 22kHz +/-1.5dB

• Drawing upon the design characteristics of our Expose E8B, the new VXT Series of monitors consists of three models, the VXT4, VXT6, and VXT8. With a visually striking enclosure design that is equally functional, providing low resonance, improved structural integrity and extended low-end, slotted ports for reduced port turbulence, plus a sleek curvature that provides excellent imaging characteristics and a wider sweet spot the VXT monitors achieve a new level of precision.
• Drivers: Woofer:4" Woven Kevlar
• Tweeter: 1" Silk Dome NEO
• Input: XLR-1/4" TRS Combo
• 10k Ohm Blanced
• Pin 1 + Sleeve = Ground
• Pin 2 + Tip = (+) High
• Pin 3 + Ring = (-) Low
• Amp & Fusing: HF: 15 Watts
• LF: 30 Watts
• 2.0A 100VAC 50HZ
• 2.0A 110-120VAC 50/60Hz
• 1.0A 220-240VAC 50/60Hz
• Frequency Response: 56Hz - 22kHz +/- 2dB

• Woofer: 8 " Glass Aramid Composite Woofer
• Tweeter: 1" Neodymium Soft Dome Tweeter with Ferro Fluid
• Input: XLR (3-pin), RCA & 1/4" TRS - 10k Ohm Balanced / Unbalanced
• Amplification: 140 Watt Dynamic Power Bi-amp
• 24 dB Octave Filters
• Frequency Response: 45Hz - 20kHz
• Video Shielding: Yes

• Drivers: Woofer: 6" Glass Aramid Composite Woofer
• Tweeter: 1" Neodymium Soft Dome Tweeter with Ferro Fluid
• Input: XLR (3-pin), RCA & 1/4" TRS - 10k Ohm Balanced / Unbalanced
• Amplification: 100 Watt Dynamic Power Bi-amp
• 24 dB Octave Filters
• Frequency Response: 49Hz - 20kHz
• Video Shielding: Yes

• Drivers: Woofer: 5" Glass Aramid Composite Woofer
• Tweeter: 1" Neodymium Soft Dome Tweeter with Ferro Fluid
• Input: XLR (3-pin), RCA & 1/4" TRS - 10k Ohm Balanced / Unbalanced
• Amplification: 75 Watt Bi-amp Dynamic Power
• 18 dB Octave Filters
• Frequency Response: 53Hz - 20kHz
• Video Shielding: Yes

• Woofer: 10" High Excursion Glass Aramid Composite Woofer
• Input: XLR (3-pin), RCA & 1/4" TRS - 10k Ohm Balanced / Unbalanced
• Amplification: Peak Power : 225 Watts
• Variable Low Pass Filter + Phase
• Fixed 80Hz High Pass Filter
• Active Limiter
• Frequency Response: 36Hz - 50Hz to
• Video Shielding: Yes

These compact, super-affordable 2 x 20-Watt near field monitors feature ultra-high resolution 24-bit/192 kHz D/A converters, which let you connect digital sources directly in order to eliminate analog line-loss and hum. Connect your computer sound card, keyboard, MP3 & Mini Disc players and enjoy excellent detail and great dynamics—Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface! The built-in amplifiers offer plenty of headroom, while the powerful woofers and tweeters provide an ultra-linear frequency response. Two stereo analog inputs featuring 1/8" TRS and stereo RCA connectors can be used simultaneously or mixed with a digital stereo source. The speakers also feature individual volume controls for both Line inputs plus Bass and Treble EQ controls, and there is a ¼" TRS headphone connector with a front-panel auto-mute loudspeaker function.

The perfect all in one amplifier and speaker kit for the home DJ or Karaoke enthusiast. The amp has a small footprint designed to sit below your DJ mixer

Speakers

• 2 x 80W max power
• 6.5 inch woofers
• Soft dome tweeters
• Max SPL 89dB
• Black finish

DJ2 Amplifier

• 50W per channel
• 4 x line input
• 2 x 1/4 inch jack mic input
• Built in DSP vocal echo effect
• 2 band microphone EQ

Complete home DJ monitor system with amplifier, speakers and cables. The DJ2 Amplifier is designed to sit conveniently below a small format DJ mixer.. beteeen your decks.

KHS 6.5 Speakers

• 2 x 75W max power
• 6.5" woofers
• Soft dome tweeters
• Max SPL 89dB
• Beech finish

DJ2 Amplifier

• 50W per channel
• 1 x line level RCA Phono audio input
• Fan cooled
• Mirror front finish
• Backlight blue VU meter

Complete home DJ monitor system with amplifier, speakers and cables. The DJ3 USB amplifier plays MP3 audio files directly from USB data storage devices plugged into the front panel and also plays files direct from the on board SD card reader. It has a small footprint designed to sit below your DJ mixer

Speakers:

• 2 x KHS Dual 6.5 speakers
• 2 x 95W max power
• 2 x 6.5 inch woofers
• Soft dome tweeters
• Max SPL 89dB
• Black finish

Amplifier:

• DJ3 USB amp
• 70W per channel
• 1 x line level RCA phono audio input
• Front panel USB input socket
• Front panel SD card reader
• Plays MP3 files straight from USB
• Front panel transport controls for MP3 playback
• Fan cooled
• Backlight blue VU meter
• Black finish

Universal Acoustics Vibro-Pads are specially formulated anti-compression pads designed to improve the accuracy of your nearfield monitors by Isolating and de-coupling them from the surface they are resting on.

Each set of Universal Acoustics Vibro-Pads includes not only 4 x 100mm wide x 300mm deep pad sets but also an additional set of 4 x 50mm half width pads sets which can be used to support and de-couple other items in your studio such as a Laptop, Computer keyboard, extra set of small monitors, DVD/CD player/burner, turntable or anything that can resonate that would benefit from isolation from your workstation surface, rack, speaker stands or shelving.

Each base pad includes it’s own pre-cut levelling wedge adjuster which in standard position will provide a level surface. Alternatively the levelling wedge adjuster can be removed to provide either a 5o or 10o slope angled up or down according to which way round the base pad is resting.

Whichever position Vibro-Pads are utilised we guarantee that your monitors will provide a noticeable sonic improvement and your recordings will sound more accurate and defined once the vibration and resonance has been removed, and because your Studio Monitors are the most critical components to evaluate your recordings their full performance can only be truly revealed once vibration has been removed and total isolation has been achieved.

Manufactured in dark charcoal colour from a specially selected 65Kgs/3m density High Load Bearing (HLB) Hard foam, Vibro-Pads will perform over a long life demonstrating true resilience to compression and will not fatigue during use resulting in years of improved listening quality within your studio or private audio environment.