• LED Dual Lens Moonflower with sharp Red, Green & Blue high output colored beams
• Output similar to dual 250W Halogen lamps*
• Produces LED patterns that can be projected on a dance floor or wall
• Wide beam spread covers a large area
• Sound active from built-in programs
• High output with new lens technology
• Very low power consumption
• Extreme long lifetime of the LEDs (100,000 hr. rating)
• Circuit breaker no need to change fuses
• Includes hanging bracket

• LED Dual Lens Moonflower with sharp Red, Green & Blue high output colored beams + LED Strobe in one light
• Produces LED patterns that can be projected on a dance floor or wall
• Wide beam spread covers a large area
• Sound activate beams from built-in programs
• Rich, saturated colors that will not fade
• Very low power consumption
• No moving parts
• Runs extremely cool! NO Duty Cycles! Can run all night!
• Razor sharp beams
• Includes hanging bracket
• Extreme long lifetime of the LEDs (100,000 hr. rating)
• Includes hanging bracket

• LED Moonflower with 192 sharp Red, Green & Blue high output colored beams (5mm LEDs: 72 Red, 48 Green & 72 Blue)
• Output similar to a 400W Halogen lamp
• Slow smooth and Fast Sharp movements
• Produces a wide coverage of LED patterns and text letters that can be projected on a ceiling, dance floor or wall
• 10 built-in phrases (Happy Birthday, Happy Holidays, etc.)
• 5 programmable phrases (up to 30 characters per phrase total)
• Easy-to-use - Operational by its own built-in light show (Sound active) or DMX-512 (USITT)
• High output with new lens technology
• Very low power consumption
• Extreme long lifetime of the LEDs (100,000 hr. rating)
• Linkable via 3-pin XLR DMX In/Output
• 3 DMX Channels
• LED DMX display with 4-button LED menu
• AC IEC outlet on rear to daisy chain power
• PS2 type keyboard input on rear of unit to input characters and letters.
• Light source adjustable manually from outside
• Includes mounting brackets

• LED Moonflower with 224 sharp Red, Green & Blue high output colored beams (5mm LEDs: 88 Red, 48 Green & 88 Blue)
• Output similar to a 250W Halogen lamp*
• Produces a wide coverage of LED patterns that can be projected on a dance floor or wall
• Easy-to-use - Operational by it`s own built-in light show (Sound active) or DMX-512 (USITT)
• High output with new lens technology
• Very low power consumption
• Extreme long lifetime of the LEDs (100,000 hr. rating)
• Linkable via 3-pin XLR DMX In/Output
• 4 DMX Channels
• LED DMX display with 4-button menu
• AC IEC outlet on rear to daisy chain power
• Includes mounting brackets

• 4-head LED Moonflower effect with sharp Red, Green, Blue and White high output color beams
• 224 LEDs (80 Red, 60 Green, 48 Blue & 36 White LEDs)
• Output similar to quad 250W Halogen lamps (based on visual side-by-side comparison with halogen fixture)
• Produces LED patterns that can be projected on a dance floor
• 4 or 7 DMX Channel modes, DMX-512 protocol
• 3 operational modes: Sound active with built-in programs; DMX Controller or UC3 Universal Controller
• Electronic dimming: 0 - 100%
• Fast to slow Strobe
• Wide beam spread covers a large area
• Sound active from built-in programs
• High output with new lens technology
• Very low power consumption
• Extreme long lifetime of the LEDs (100,000 hr. rating)

• LED DMX-512 Moonflower from the popular REVO Series with 256 razor sharp Red, Green, Blue & White Beams
• Produces unique and exciting LED patterns that may be projected on a wall, ceiling or dance floor a great with or without fog
• 256 total 5mm LEDs : 64 Red, 64 Green, 64 blue and 64 White
• 2 DMX Channel Modes (4 Channel mode or 256 Channel mode)
• 4-Button LED DMX Display
• Linkable via XLR connections
• Wide beam spread covers a large area
• 3 operation modes: DMX, Sound Active & Master/Slave
• Sound active from built-in programs
• Strobe function
• Beam angle: 50 degrees
• Runs extremely cool! NO Duty Cycles! Can run all night!
• Includes hanging bracket
• Power Consumption: 29W maximum
• Extreme long lifetime of the LEDs (100,000 hr. rating)
• 1/4” input for optional American DJ UC3 remote control (sold separately)
• In/Out IEC power connections to daisy-chain power

• LED DMX-512 Moonflower with sharp Red, Green, Blue & White Beams
• 7 LED Clusters - 392 total LEDs : 140 Red, 105 Green, 84 blue and 63 White
• 10 DMX Channels (4 Channel mode or 10 Channel mode)
• 4-Button LCD DMX Display
• Linkable via XLR connections
• Output similar to a 600W Halogen lamp*
• Wide beam spread covers a large area
• 3 operation modes: DMX, Sound Active, Master/Slave & UC3 controller
• Sound active from built-in programs
• Strobe function
• 0 - 100% Dimming
• Very low power consumption (Power Draw: 50W)
• Extreme long lifetime of the LEDs (100,000 hr. rating)
• Includes hanging bracket
• 1/4” input for optional remote control (sold separately)

• LED DMX-512 Moonflower with sharp Red, Green, Blue & White beams
• 52 total LEDs: 16x Red, 12x Green, 12x Blue & 12x White
• 4 DMX Channels
• Output similar to a 250W Halogen lamp*
• Wide beam spread covers a large area
• 4 operation modes: DMX, Sound Active, Master Slave or remotecontroller
• Sound active from built-in programs
• High output with new lens technology
• Very low power consumption
• Extreme long lifetime of the LEDs (100,000 hr. rating)
• Includes hanging bracket
• 1/4” input for optional remote control (sold separately)

• LED DMX-512 Moonflower with very wide Red, Green, Blue & White Beams
• 162 total LEDs : 48 Red, 36 Green, 42 Blue and 36 White
• 5 DMX Channels
• 4-button LED DMX display on rear panel
• Linkable via XLR connections
• Wide beam spread covers a large area
• Beam angle: 29 degrees
• 3 operation modes: DMX, Sound Active & Master/Slave
• Built-in high-energy lighting programs (Master/Slave & Sound Active)
• Color strobe effect (fast to slow)
• Electronic Dimming 0 - 100%
• Linkable via 3-pin XLR cable
• IEC IN/OUT on rear to daisy chain power
• Includes mounting bracket & safety hook
• rotating LED Panel.

• LED DMX-512 barrel mirrored scanner with sharp Red, Green, Blue & White Beams
• 52 total LEDs : 16 Red, 12 Green, 12 blue and 12 White
• 4 DMX Channels
• 4-Button LCD DMX Display
• Linkable via XLR connections
• Output similar to a 250W Halogen lamp*
• Wide beam spread covers a large area
• Beam angle: 21-degreees
• 4 operation modes: DMX, Sound Active , Master/Slave & UC3 controller
• Sound active from built-in programs
• Strobe function
• Very low power consumption (Power Draw: 12W)
• Extreme long lifetime of the LEDs (100,000 hr. rating)
• Includes hanging bracket

• Classic American DJ Effect - Now with LED technology
• 2x 9-watt 3-in-1 RGB TRI Color LEDs produces a variety of color effects (Red, Green, Blue, Purple, Yellow, Cyan & White)
• 32 Sound activated beams dance and strobe to the music
• Power consumption: 32W per unit
• Long life LEDs (100,000 hr. rating)
• Multi-voltage operation: AC 100V-240V 50/60Hz
• In/Out IEC power connections to daisy-chain power

• DMX Channels: 4 DMX Channels
• Operating modes: DMX, Stand alone (Sound active or Auto)
• Master/Slave (Sound active or Auto)
• Includes hanging bracket
• Sound Active
• Beam Angle: 65 degree
• Beams: 57 razor sharp beams
• Power Draw: 12.5 W
• Light Source: RGB in 1 LED

• 800hr. Lamp Life
• High-powered 160W UV panel in a compact, low profile case
• Throws large amounts of fluorescent UV over a wide area
• On/off switch
• Includes hanging bracket
• Low power consumption
• Lamp: 4x 40W LL-UVP40, 800 hr. long life

• 100 Watt output
• Wide coverage
• Glass Reflectors
• Shatter proof front glass cover
• Aluminum Case Design
• Fluorescent UV lamp
• Aluminum Die Cast sides
• Aluminum case
• Aluminum yoke
• Convection cooled vents
• 4mm Reflective Glass mirrors
• 5mm Shatter proof Glass cover

An eye-catching addition to any event, the Blazar UV Pink™ has two separate emitters - one red, and one violet. These produce a laser beam that shows flat red on darkened surfaces and glows a hot pink when it hits a lighter coloured surface. A wide variety of animation effects dance around the venue producing a breathtaking display sure to stand out from the crowd.

Projecting vibrantly dynamic designs on floors, walls and ceilings, Saturn is a lightweight unit especially suited for mobile, touring and hire users. A slew of motion effects and colours are controlled through onboard pre-sets or DMX512 signals. Colours are enhanced through a top quality focussing lens. The conveniently located LED display can be accessed from underneath the unit even when it is mounted in trussing or on a lighting bar

This complete, compact colour mixing package includes 2 x iColor 3, 1 x CA-32 - Colour Mix Controller, 1 x CA-32F - Foot Controller and 2 x 10m DMX cables.

• iColor 3 Versatile and very compact colour mixing package based on 3 x 300W or 3 x 500W lamps
• Equipped with 3 heat resistant dichroic filters in red, blue, green and yellow
• 4 Channel: pre-set colours - chase selector - speed - master dimmer
• 2 way bracket for stand or floor mounting
• Barn doors for precise light direction
• Fan cooled
• Supplied with 500watt Lamps
• CA-32 Easy to use 4 channel dedicated DMX controller for iColor lighting systems
• 4 different user modes:
• Hold: Instant access of 9 preprogrammed colours.
• Static Chase: 12 different chase patterns with user selectable speed
• Sound Chase: 12 different chase patterns with audio triggering
• Spectrum Mix: 32 different spectrum mix colours, including colour fade
• Adjustable speed
• Adjustable dimming Colour fade with adjustable fade time, Blackout
• Full on
• CA-32F Linkable to the Colour Mix CA-32 controller
• Switchable between CA-32F and CA32 Colour Mix controller Switches to select hold colours, blackout, full on and chase patterns
• Supplied with 10m cable for connection to the CA-32 controller

Features

• A professional color mixer comes with red, green, blue and yellow heat-resistant dichroic mirrors.
• DMX 4 channels: Color, Chase, Speed, and Dimmer.
• 32 preset colors and various chase patterns.
• Great pre-programmed lighting shows under Master/Slave linkage triggered by music, giving the best performance.
• Fan cooled with a floor standable bracket.
• Power supply: AC 120V ~ 60Hz / 230V ~ 50Hz
• Bulb: J type 300W x 4 at 120V or 500W x 4 at 230V
• Size: 450 x 270 x 175 mm
• Weight: 7.0 kgs

• Complete high powered DMX par can kit
• Includes stand, padded rig bag, stand bag & foot controller
• 4 x RGB par can each has 7 x 3w tri-colour LEDs producing a high power colour wash
• Individual tilt and swivel for each par can
• T-bar incorporates built-in controller
• Sound-to-Light, Auto, DMX512 & Master/Slave modes
• 15 channel DMX512 operation
• XLR DMX in and out
• Dimmable light output
• Pre-programmed patterns in Auto mode
• Foot control pedal / one pedal will control several units
• Full colour mixing with additional DMX controller
• Tough metal chassis
• Light weight par can design

• Dynamic ready-to-go lighting
• From the makers of the original, award winning LED Parbar
• Portable system of four LED lights, comprising of 75 LEDs (25 red, 25 green and 25 blue) per can.
• This unit creates superb colour wash effects. In just a few moments this portable system can be set up and ready to rock the party. The fully positional par cans are adjustable individually for maximum effect and coverage. The versatile kit and operating system creates a multitude of effects. Complete with a lighting stand, footswitch controller and carry bag. It's ideal for every Party, mobile DJs set or the performer on-the-go, including schools, hire and wedding parties. The Kam Partybar is compact, powerful and affordable.
• Fully adjustable in lighting stand and floor mount positions
• Includes truss with clamps, safety mounting points and floor stand
• Kit includes footswitch controller, light stand (with bag) and case
• Compact slim line profile lights are just 3cm deep
• Adjustable stand from 1.37m to 2.15m
• Built-in auto programs / built-in sound activated programs
• Built-in static or automated programs
• Easy-trigger music activated mode
• Set up and break down very is easy and fast
• Two peddle footswitch for easy operation

• RGB lighting effect that produces stunning derby effects
• Tri colour power LEDs creating 7 dynamic colours
• 16 angled glass lenses for dispersion
• DMX512 compatible
• 3 channel assignable
• Sound-to-Light operation via built-in mic
• Variable mic sensitivity
• Fan cooled operation
• Tough metal chassis
• Safety chain loop
• Adjustable hanging bracket
• 9w LEDs

• Fast scanning RGY plus Orange animation laser
• Powerful and cost effective 40mW green / 100mW red laser
• Fast scanning motor that creates amazing animations
• Pre-programmed animations & graphic images
• Sound-to-Light, Auto, DMX512 & Master/Slave modes
• 10 channel DMX512 operation
• XLR DMX input & output
• Tough metal chassis
• Adjustable hanging bracket
• Fan cooled operation
• Key operated power control

• Utra blue 500mW laser with micro-step scanning
• 100 pre-programmed moving effects
• 500mW blue laser @450nm
• Scanner system: micro-stepping
• 7 channel DMX512 operation
• Pre-programmed moving patterns in Auto mode
• Sound-to-Light, Auto and DMX modes
• Linkable Master/Slave mode

• Updated version of the multi Star Cluster effect DMX laser
• Multiple Star Cluster effects in one unit!
• 100mW red laser / 40mW green laser
• Includes Kaleido, 3D, Firework & Cluster effects
• High-efficiency optical system
• Pre-programmed moving patterns in Auto mode
• DMX512, Sound-to-Light and Auto modes
• 8 channel DMX512 XLR input and output
• Linkable Master / Slave mode

Features

• 150W HTI professional DMX barrel injection moulded lighting effect
• Now incorporating the latest HTI bulb technology
• Included HTI150 bulb
• Easy LED DMX channel select
• Superior glass optics with screw based manual focus adjustment
• Master, slave and stand alone modes
• Lightweight and tough construction
• DMX and XLR in and out connections
• Easy synchronisation of unlimited units
• Sound to light operation without DMX (with sensitivity adjust)
• Forced fan cooling and full thermal protection
• Universal DMX512 compatibility
• Smooth micro stepping motors

Specifications

• 14 static gobo designs + open shutter
• 12 dichroic colours and 2 dual colours + white
• Wide rotational coverage

High-performance DMX stroboscope with 1,500W xenon lamp

• 2 DMX control functions: channel 1: flash frequency, channel 2: brightness
• Adjustable flash frequency: 1-12 flashes /sec.
• Controllable via controller STROBE-4C available optional
• Master/slave mode with automatic run of programmes
• Metal housing with movable mounting bracket
• Power supply: 230V˜/50Hz/1,750W max.
• Dimensions: 45x13x12cm
• Weight: 4.4kg

Stroboscope with 75W xenon lamp

• Adjustable flash frequency: 1-12 flashes/sec.
• 6.3mm jacks for synchronous operation of several STROBE-75 units
• Controllable via STROBE-4C or STROBE-1C, available at option
• Plastic housing with movable mounting bracket
• Power supply: 230V˜/50Hz/100W max.
• Dimensions: Ø 22cm x 28cm
• Weight: 1.4kg

Controller for operating 4 DMX stroboscopes and 4 analog stroboscopes.

• Suitable for STROBE-1500DX and STROBE-75
• 8-channel DMX technology
• Fader for speed, fader for dimmer (in DMX mode only)
• Momentary push-button for Full On
• Momentary push-button for Flash
• Blackout function
• 10 different chase programmes
• Automatic mode or music-controlled via integrated microphone, selectable
• Metal housing
• Connections: 1 x 3-pole XLR, 4 x 6.3mm jack, 1 x low-voltage jack
• Power supply: 9V DC current /500mA via supplied plug-in PSU 230V˜/50Hz/18VA
• Dimensions: 205x85x135mm

Controller, to be installed, for operating up to 4 analog stroboscopes.

• Suitable for STROBE-75
• Speed control
• Connection: 6.3mm jack
• Power supply: 230V˜/50Hz/5VA
• Dimensions: 152x59x65mm

LED DMX light effect unit "Flower", with space-filling dot pattern effect in different colour combinations.

• 3 primary colours (red, green, blue) plus white, with colour mixer
• 156 super bright LEDs for highest luminous efficiency (red: 48, green: 36, blue: 36, white: 36)
• Long life at low power consumption
• Large special lens for high luminous efficiency
• 4 DMX control functions (channel 1: mode, channel 2: pattern/chase, channel 3: pattern strobe/chase speed, channel 4: dimmer)
• Processor-controlled colour change
• Control panel with LED display for addressing and preadjustments
• Controllable via remote control LC-3 or FSC-3, available optional
• Music-controlled via integrated microphone
• Master/slave mode with automatic run of programmes
• Fanless cooling concept
• Metal housing with movable mounting bracket
• Power supply: 230V˜/50Hz/20VA
• Dimensions: 25x21.5x28cm
• Weight: 3kg

• Low-cost, Semiprofessional Moving Head
• For the control via the DMX512 interface, via miniature remote control, or music-controlled via built-in microphone. Range of applications: stage, hobby, and discos. The menu control of the unit is preset via a processor-controlled LED display.
• 5 DMX control functions
• Music-controlled via integrated microphone
• Master/slave mode with 2 short show programmes
• Controllable via mini remote control LC-3 or FSC-3, available at option
• Horizontal resolution and vertical resolution: 255 steps each
• Rotating angle: 540° horizontal, 270° vertical
• Colour wheel with 11 colours plus white
• Gobo wheel with 14 gobos plus spot and shutter, strobe effect or gobo switch effect with variable speed (1-7 flashes/second)
• Operating hour meter
• Matching halogen lamp (24V/250W/GX5.3) is available as an accessory and is not supplied with the unit

"CRISS-CROSS" DICHROIC BEAM EFFECT

Experience has proven that if you really want to make something better you can! We have done just that with the new SWORD lighting effect.

Whilst it may look vaguely similar it is in fact a very different machine from its predecessor. The new SWORD is far more compact, focusable and features a protective grill for the dichroics. But most importantly of all it is four times brighter than its predecessor and its randomly produced dichroic colours are extremely strong and rich. The SWORD has two independently motorised dichroic mirrors which, depending on their position, can produce up to six random coloured beams of pure dichroic colour. These mirrors can be adjusted to allow the beams to sweep in parallel or diagonally and the whole SWORD can be mounted either vertically or horizontally to provide the user with a generous choice of effect presentation. The light source is provided by two inexpensive 100W 12V dichroic lamps, each focusable. Sound activation is totally automatic and requires no connection to a sound system. Simply connect the SWORD to the power and its internal electronics will sense the sound level and activate the mirrors accurately in time with the bass beat of any music.

Features

• A professional color mixer comes with red, green, blue and yellow heat-resistant dichroic mirrors.
• DMX 4 channels: Color, Chase, Speed, and Dimmer.
• 32 preset colors and various chase patterns.
• Great pre-programmed lighting shows under Master/Slave linkage triggered by music, giving the best performance.
• Fan cooled with a floor standable bracket.
• Power supply: AC 120V ~ 60Hz / 230V ~ 50Hz
• Bulb: J type 300W x 4 at 120V or 500W x 4 at 230V
• Size: 450 x 270 x 175 mm
• Weight: 7.0 kgs

colours available

• yellow
• orange
• primary red
• magenta,straw
• deep amber
• light salmon
• dark pink
• light blue
• fern green
• dark blue
• dark green
• mauve
• bright pink
• primary green
• flame red
• deep lavender
• bluegreen
• dark lavender
• pale gold
• deep blue
• congo blue
• bright rose
• peacock blue.

Suitable as front filter for the spotlight PAR-36. Ø 110mm, Colours available:

• blue
• red
• yellow
• green

A complete mirror ball lighting kit comprising of a 204mm mirror ball, rotator, pin spot, Par 36 lamp and 5 coloured filters

A lightweight mirror ball, which can provide a disco atmosphere to parties, barbecues, dances, etc. by projecting a sparkle effect on to surfaces within range when a spotlight is directed on to the mirror ball. Made from lightweight material, covered with polished mirror glass facets, these mirror balls have a mounting eye for hanging. Available in sizes 8cm 10cm 12cm 16cm 20cm 30cm 50cm

• Suitable for applications in public areas, e.g. discos
• Black lacquered metal housing, Ø 19.5cm
• Quick-acting closure for ropes
• Additional safety eyelet
• Supplied with safety rope
• suitable for mirrorbalss 20cm 30cm 50cm
• Load capacity: 10kg

• for decoration purposes
• suitable for mirrorballs 8cm 10cm 12cm 16cm
• Black lacquered metal housing, Ø 10cm
• Mains connection cable with earthed plug